Aricjm15
Member
- Joined
- September 21, 2009
- Messages
- 12
- Reaction score
- 0
- City, State
- Grayslake IL
- Year, Model & Trim Level
- 97 Eddie bauer.
This started last night during normal driving, I have the vehicle on jackstands right now and cannot visibly see anything wrong. Axle shafts and drive shafts appear fine. Brake calipers are tight and have not come unbolted. When the truck is put in drive and run on the jackstands 3 of the 4 wheels spin freely without any noise. When the brake is held down to put some load on the system it rumbles and vibrates like hell.
I'm hoping someone else has experienced this and can tell me what might be wrong. I am leaning towards the transfer case being screwed rather then the front differential. The front wheels can be spun by hand without any binding or audible noise.
I'm hoping someone else has experienced this and can tell me what might be wrong. I am leaning towards the transfer case being screwed rather then the front differential. The front wheels can be spun by hand without any binding or audible noise.