98-00 Explorer Altezzas on the way!

[DarkFox1]

the only holes drilled in my ride right now are like 4 of them under the body where the front neon mounts.. the idea of cutting into the body of my ride makes my hair stand on end.. I can't do it..

 

[sideswipe]

Re: Ok, this is really really REALLY LAME!

Originally posted by 00XLT
Well, I just got home and the top part of my left taillight is fogged up on the inside. I couldn't believe it so I took a cup of water and poured it all along the top, edges, etc. of the taillight but nothing took into the taillight. Did God just find it funny and placed moisture inside or does anyone know what causes this? They aren't cracked or anything, can't figure out what the heck led to this. While I'm at it, anyone know how to fix this and prevent it from happening again?

Did you ever find out where the leak was and seal it? I had the same problem with my Altezzas over the weekend and am looking to see if that fixed your problems or if you did something else.

 

[00XLT]

I did find out what it was, or at least I think I did.. in any event it's fixed.. Right above the turn signals you should see a little 1mm/2mm rectangular hole, that needs to be covered up (I used "Ace Hardware High Tech Sealant" and electrical tape), it leads straight into the taillight. For extra added precaution I wrapped electrical tape around the base of each socket to completely seal it in with the taillight.
Hey, when you get some pics up of your ride make sure you put some of the sidemarkers, been debating getting some, not sure what style would look good and location to install it.

 

[sideswipe]

Will do man, I will have those up this weekend after I put on the billet grille.

 

[DarkFox1]

side... markers? I'm missing something here

 

[00XLT]

Yah, you know like you see on BMWs, Audi's, etc, the little "marker light" that flashes with the turn signal just in front of the doors. Cool addition I think, there are so many styles though I can't decide

 

[DarkFox1]

ah.. I C, around the v8 symbol area.. hrmm...... thats not a bad idea actually although I don't beleive I'll be adding one. for it to look right ya gotta cut the fender *shudder*

 

[RytM1]

Cameron has some side markers on his ride. Here is the link with the how-to, along with a few pics. http://members.home.net/engcamron/sidemarker.htm

 

[RytM1]

Cameron has some side markers on his ride. Here is the link with the how-to, along with a few pics. They look even better in person. http://members.home.net/engcamron/sidemarker.htm