98 Explorer 5.0 in 00 Ranger / Vacuum Questions

[nikica]

Hey guys I did a swap into my ranger. The explorer was running and driving before I pulled the motor and trans. I got the motor running in my ranger but have a few questions regarding the vacuum lines.

Most of my vacuum lines were plugged already and I have a trick flow specialties intake manifold and bbk throttle body. There was line that elbows out from the driver side its the only one. Just curious which ones I can plug for good and which ones I need to run. I currently only have the one going to the oil fill drain and the one going to the brake booster.

 

[Dono]

There should be one to the pcv valve, and if memory is correct, another vac line went to the vapour management for the fuel tank. In the explorer, this was to the drivers side front of the vehicle.

I thought the line at the oil fill tube didnt go to vacuum, but went to the air intake pipe, after the maf so its metered air.