Erwin
Member
- Joined
- May 2, 2002
- Messages
- 32
- Reaction score
- 0
- City, State
- Yauco, Puerto Rico
- Year, Model & Trim Level
- 99 Sport
Hi Guys,
I need some help here: I just bought a remanufactured A/C compressor for an Explorer 4.0L (VIN: E) 2002 1/2 and it's completely different as the currently installed. The hoses, on the current one, goes into the side of the compressor. While in the new one, goes right behind. The Engine does have the bolt holes to install this compressor but my concern is about the aluminum hoses and the connector adapter.
Any idea if it could be possible to adapt this compressor?
Regards,
I need some help here: I just bought a remanufactured A/C compressor for an Explorer 4.0L (VIN: E) 2002 1/2 and it's completely different as the currently installed. The hoses, on the current one, goes into the side of the compressor. While in the new one, goes right behind. The Engine does have the bolt holes to install this compressor but my concern is about the aluminum hoses and the connector adapter.
Any idea if it could be possible to adapt this compressor?
Regards,
