Hossexplorer
Well-Known Member
- Joined
- September 30, 2008
- Messages
- 140
- Reaction score
- 22
- City, State
- Baker City, OR.
- Year, Model & Trim Level
- '93 XLT
I recently finished a 5.0 swap in my 93 Explorer. Now, I can't seem to get the Air Conditioner to work. ALL components are brand new and from the factory 4.0, so I didn't change anything in the A/C system.
The Fan blows inside and the A/C light turns on but is not cold. If I run test leads from the compressor to the battery directly, the A/C blows COLD inside the cab. But, the compressor will not kick on from the switch inside.
Any ideas? Thanks!
The Fan blows inside and the A/C light turns on but is not cold. If I run test leads from the compressor to the battery directly, the A/C blows COLD inside the cab. But, the compressor will not kick on from the switch inside.
Any ideas? Thanks!