Boilerfan93
Member
- Joined
- December 3, 2006
- Messages
- 10
- Reaction score
- 0
- City, State
- Lebanon, OH
- Year, Model & Trim Level
- '93 LTD
I recently replaced my entire A/C system (reman compressor, acc/drier, orifice tube, condenser, hoses) excluding the evaporator which I flushed. It worked great (center vent = 40 deg) for about a month. All of sudden it started blowing hot air. The pressures were as follows:
Static 85psi @ 85 deg ambient
H - 150 psi
L - 10 psi
I assumed the compressor was bad, so I had new one sent under warranty. I replaced it last night, evacuated the system. It held vacuum for 10 minutes so I assume it has no leaks. I recharged it and now I am getting the exact same pressures with no cold air!
Any ideas?
Static 85psi @ 85 deg ambient
H - 150 psi
L - 10 psi
I assumed the compressor was bad, so I had new one sent under warranty. I replaced it last night, evacuated the system. It held vacuum for 10 minutes so I assume it has no leaks. I recharged it and now I am getting the exact same pressures with no cold air!
Any ideas?