A4LD Guru's what's this?

[sqhurt]

I don't know what kind of affect it will have keeping it in there for long term use. I suspect that it might cause the friction plate paper material to eventually fall apart, and then you will need a rebuild. I'm not trying to scare you, but if you've ever looked at how fragile those clutch pack plates are, then you will see what I mean. This also might have an affect on the seals, bands, servos, and possibly other parts. Think of what drain cleaner does when it sits in pipes. It's made to unclog, then get washed away, and not sit or be recirculated continuously.

Lol well yea your scarring me!! That doesn't sound good at all.. But I totally understand what your saying about it might not be a wise ideal to leave it in there, an I appreciate your help an concern... Say if I do change it I'm soo gonna do the drain plug thing for it so I don't have to keep dropping the pan.

Do you think I could just unhook one the lines by the radiator that goes to the tranny an let it pump some out there an just add what was let out? Anything then having to crawling under there an pulling the pan again.. Lol

 

[BrooklynBay]

This will drain out the old fluid, but won't clean the internal filter or magnet in the pan.

 

[sqhurt]

This will drain out the old fluid, but won't clean the internal filter or magnet in the pan.

K.. Thanks for your help an advise BrooklnBay