9XLT3Explorer
Well-Known Member
- Joined
- January 31, 2005
- Messages
- 184
- Reaction score
- 3
- City, State
- jacksonville,florida
- Year, Model & Trim Level
- 91 4x4
My trans was acting up like it took 15 sec to shift into first.Then the RPMs would run really high and rev hard and then slam into gear.Well i thought i would change the filter and fluid and see if there was anything there in the pan that might be wrong too.
Well after dropping the pan i found the overdrive anchor pin in the pan.
Now i have to "manually" shift into first.
My question is does anyone know how this pin goes back in?
This has been about a month now and its driving me crazy the way i have to get into first.
Also are there any long term problems that might occur if this doesnt get fixed?
Thanks for any help.
Mike
Well after dropping the pan i found the overdrive anchor pin in the pan.
Now i have to "manually" shift into first.
My question is does anyone know how this pin goes back in?
This has been about a month now and its driving me crazy the way i have to get into first.
Also are there any long term problems that might occur if this doesnt get fixed?
Thanks for any help.
Mike
