? about what size is my throttle body?

[2000XPLORERSPORT]

they got a 66 mm. throttle body for my 2000 explorer sport with the 4.0l ohv motor.but i want to know what size my stock throttle body is? if the bbk one is not really much bigger.....then i don'y believe its worth the $225.00 http://www.explorerexpress.com/throttle-body-9501-explorer-p-216.html

same thing about the 75 mm. mass air meter......is it worth the money to upgrade to these items? does anyone know the size of my stock mass air flow meter? heres a link to the aftermarket one. http://www.explorerexpress.com/mass-meter-75mm-chrome-bullet-flanged-9597-explorer-p-683.html

 

[2000XPLORERSPORT]

no one????

 

[aldive]

same thing about the 75 mm. mass air meter......is it worth the money to upgrade to these items? does anyone know the size of my stock mass air flow meter? heres a link to the aftermarket one. http://www.explorerexpress.com/mass-meter-75mm-chrome-bullet-flanged-9597-explorer-p-683.html

I would not recommend anything over 73 mm.

Your best bet is to use a 73 mm C & L housing with your stock electronics. Take a look at http://www.explorerforum.com/forums/showthread.php?t=136883&highlight=maf

Good luck ...

 

[aldive]

they got a 66 mm. throttle body for my 2000 explorer sport with the 4.0l ohv motor.but i want to know what size my stock throttle body is? if the bbk one is not really much bigger.....then i don'y believe its worth the $225.00 http://www.explorerexpress.com/throttle-body-9501-explorer-p-216.html

I think the stock is 65 mm.

I wouldn't recommend that purchase.

Consider having your TB modified by cutting throttle shaft and screws.and boring the diameter. Take a look at http://www.explorerforum.com/forums/showthread.php?t=172480

 

[2000XPLORERSPORT]

I would not recommend anything over 73 mm.

Your best bet is to use a 73 mm C & L housing with your stock electronics. Take a look at http://www.explorerforum.com/forums/showthread.php?t=136883&highlight=maf

Good luck ...

yea i seen them before.thats probably what i would go with.

 

[2000XPLORERSPORT]

I think the stock is 65 mm.

I wouldn't recommend that purchase.

Consider having your TB modified by cutting throttle shaft and screws.and boring the diameter. Take a look at http://www.explorerforum.com/forums/showthread.php?t=172480

yea if the aftermarket one is only like 1 mm bigger,its not worth that kind of money.but i read up on doing that to my throttle body.thanks for the info al.