-
Ford Explorer Community - Maintenance - Modifications - Performance Upgrades - Problem Solving - Off-Road - Street
Explorer Forum Covers the Explorer ST, Explorer Sport, Explorer Sport Trac, Lincoln Aviator,
Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Ford Aerostar
Register Today It's free!
ABS computer
- Thread starter JoshC
- Start date
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!.
RiverRat
Explorer Addict
- Joined
- February 25, 2002
- Messages
- 1,353
- Reaction score
- 0
- City, State
- San Diego, Ca
- Year, Model & Trim Level
- 1996 V8 Ranger 4x4
Should be in the left side (driver) inner fender. You are supposed to remove the fender apron to access it.
The connector looks like a mini EEC computer connector
Follow the underhood wire harness and it's right off that behind the driver headlamp.
The connector looks like a mini EEC computer connector
Follow the underhood wire harness and it's right off that behind the driver headlamp.
Josh,
Look at your Master Cylinder. You will see two lines coming out of it. They will lead to a Module with 4 lines coming out of it directly next to the Master. That is your ABS Module. On my 95, it is sitting right on top of the fenderwell, not the inner fender.
btw: I think you, me, and Dave (taxxman2k) are all messing with that bad boy right now.
Look at your Master Cylinder. You will see two lines coming out of it. They will lead to a Module with 4 lines coming out of it directly next to the Master. That is your ABS Module. On my 95, it is sitting right on top of the fenderwell, not the inner fender.
btw: I think you, me, and Dave (taxxman2k) are all messing with that bad boy right now.
JoshC
Only rolled it once honey
- Joined
- May 1, 2000
- Messages
- 4,319
- Reaction score
- 11
- City, State
- Culloden, WV
- Year, Model & Trim Level
- 97 4d OHV
Thanks alot RiverRat, i think i know what you're talking about now.
Robb, i've already got the ABS module out, ripped that bad boy out saturday. I now i'm just going to take the computer out and maybe try to sell it. I had run all new brake lines up front, strait from the master cylinder.
Robb, i've already got the ABS module out, ripped that bad boy out saturday. I now i'm just going to take the computer out and maybe try to sell it. I had run all new brake lines up front, strait from the master cylinder.
JoshC
Only rolled it once honey
- Joined
- May 1, 2000
- Messages
- 4,319
- Reaction score
- 11
- City, State
- Culloden, WV
- Year, Model & Trim Level
- 97 4d OHV
Hey guys. Not sure why it's doing it, but my brake lights aren't working. Yesterday the would flash then go off, now they don't work at all. I replaced the switch, but nothing again. Don't think this is related do you?
Explorer Features
Explorer Features
