SB98UKexplorer
Well-Known Member
- Joined
- February 27, 2008
- Messages
- 949
- Reaction score
- 2
- City, State
- UK croydon
- Year, Model & Trim Level
- 98 explorer 4.0 SOHC v6
Never ending problems on this beast, well the abs pulsates before i come to a stop and after that the abs light stays on and im back to normal braking (no abs just locks all wheels up), then after you can turn the ignition off and back on to take the ABS light off and have dodgy ABS working.
Iv had the front right hub replaced due to bearing collapsed and still is behaving the same, had the other side abs sensor cleaned and picked out dirt from the ABS ring in the hub and still acting the same, tried checking the rear ABS but its hard to take out, could only twist it?
Iv had the ABS motor replaced to another same year and still acting the same?
Is my only culprit the rear ABS that could couse this?
Also iv pulled the plug on each ABS sensor and the ABS lights up on each so they work?
Iv checked the OBD and theres no fualt codes.
What do i do now?
Iv had the front right hub replaced due to bearing collapsed and still is behaving the same, had the other side abs sensor cleaned and picked out dirt from the ABS ring in the hub and still acting the same, tried checking the rear ABS but its hard to take out, could only twist it?
Iv had the ABS motor replaced to another same year and still acting the same?
Is my only culprit the rear ABS that could couse this?
Also iv pulled the plug on each ABS sensor and the ABS lights up on each so they work?
Iv checked the OBD and theres no fualt codes.
What do i do now?