Add KEYLESS ENTRY to 2013 PI Utility using FORSCAN

[edougawa]

As a new piu owner , I'm working on acquiring all necessary items for keyless entry and remote start.
Would anyone know which key fob I should purchase for both

Search eBay (or any store you like) for ford explorer key fob. As long as they work on a retail explorer 2013~, they will work on PIUs. You can also find some stylish flip key fob.

 

[Volksjager]

I didn’t have any luck with key fobs. I ended up just getting a viper remote start with the door lock/unlock feature.

 

[edougawa]

I didn’t have any luck with key fobs. I ended up just getting a viper remote start with the door lock/unlock feature.

I was interested in getting a viper remote start. Does it works well?

 

[Volksjager]

It works great. Has really good range.

 

[mikep1058]

disregard found it under the center console, got keyless working now, just no remote start.

what did it look like?

 

[peterk9]

what did it look like?

Welcome to the Forum.
Don't be surprised if the member you quoted doesn't respond. He was last seen here on September 24, 2017.
Hopefully, another member can help.

Peter

 

[mikep1058]

Hello, so i have a 2013 piu, i have a RFA module and the connector inside the center console, only issue is the wires for the rfa have no power. (tested with a multimeter) Can anyone point me in the right direction for finding the fuse?

 

[peterk9]

Hello, so i have a 2013 piu, i have a RFA module and the connector inside the center console, only issue is the wires for the rfa have no power. (tested with a multimeter) Can anyone point me in the right direction for finding the fuse?

Is it not shown in the manual's fuse listings?

Peter

 

[mikep1058]

Is it not shown in the manual's fuse listings?

Peter

negative, not that i can find anyways

 

[mikep1058]

Is it not shown in the manual's fuse listings?

Peter

so the wires do have power whenever the ignition is on. I’m at a loss, no idea what’s wrong with the programming portion of this, thanks for the quick replies peter

 

[peterk9]

so the wires do have power whenever the ignition is on. I’m at a loss, no idea what’s wrong with the programming portion of this, thanks for the quick replies peter

In the 6th gen, several fuse listings disappeared and someone mentioned that those circuits were now controlled by the BCM. I noticed that with the 2016 refresh, the fuse listings also were shortened.

Peter

 

[mikep1058]

In the 6th gen, several fuse listings disappeared and someone mentioned that those circuits were now controlled by the BCM. I noticed that with the 2016 refresh, the fuse listings also were shortened.

In the 6th gen, several fuse listings disappeared and someone mentioned that those circuits were now controlled by the BCM. I noticed that with the 2016 refresh, the fuse listings also were shortened.

Peter

so i just gotta go into forscan and find something that has to do with the rfa in the bcm?

 

[peterk9]

so i just gotta go into forscan and find something that has to do with the rfa in the bcm?

Not sure Mike. I'm not familiar with FORScan other than it can be used to change factory settings.

Peter