Advice is needed for servo bore sleeve replacement. | Ford Explorer Forums

  • Register Today It's free!

Advice is needed for servo bore sleeve replacement.

Capone85

New Member
Joined
January 7, 2022
Messages
1
Reaction score
0
City, State
Tabernacle, NJ
Year, Model & Trim Level
2003 Ford Explorer
I have a 2003 Ford Explorer 4.0 liter 2wd which needs new OD salvo sleeve. Is there anyway to replace it without having to drop the transmission? I’m also in the process of replacing the front timing chain cassette is there anyway I can slide the plastic part on without having to take off the water pump, jack stand, ect…… or any other ways around it. I already have the driver side cable cover off.
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





I believe you can put an o-ring repair servo in vehicle.

The cassette, no you have to pull a lot of stuff to do that. Oil pan too.
 












Resleeving the bore requires removing the transmission, but you could install aftermarket servos with O rings while the transmission is in the vehicle.
Yes, I did that, worked perfectly.
 












Featured Content

Back
Top