omegaman2
Member
- Joined
- July 4, 2005
- Messages
- 34
- Reaction score
- 0
- City, State
- Grandjunction CO.
- Year, Model & Trim Level
- 1993 XLT 5 SPD
On my 93 EX the right front wheel (pass side) is 1.5 inches farther back than the left side as measured from the center of the front wheel to the center on the rear wheel.
I have a parts truck and did the same measurements and both axles are the same distance apart on either side. I cant find any place where the frame is bent and I did quite a few measurements. could the right traction beam be bent or the radius arm? They both look the same on my parts truck and this one these parts look too strong to bend in an accident where the truck could be put back on the road. What do you guys think about this ever had this problem?
I have a parts truck and did the same measurements and both axles are the same distance apart on either side. I cant find any place where the frame is bent and I did quite a few measurements. could the right traction beam be bent or the radius arm? They both look the same on my parts truck and this one these parts look too strong to bend in an accident where the truck could be put back on the road. What do you guys think about this ever had this problem?
