-
Ford Explorer Community - Maintenance - Modifications - Performance Upgrades - Problem Solving - Off-Road - Street
Explorer Forum Covers the Explorer ST, Explorer Sport, Explorer Sport Trac, Lincoln Aviator,
Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Ford Aerostar
Register Today It's free!
another manifold question
- Thread starter stu bag
- Start date
SB98UKexplorer
Well-Known Member
- Joined
- February 27, 2008
- Messages
- 948
- Reaction score
- 2
- City, State
- UK croydon
- Year, Model & Trim Level
- 98 explorer 4.0 SOHC v6
rock auto or a scraped ex with the updated o rings
kevin p
Well-Known Member
- Joined
- March 26, 2003
- Messages
- 685
- Reaction score
- 0
- City, State
- Telford Shropshire England
- Year, Model & Trim Level
- 97 4.o sohc
Ay up Stu,
I've just done alot of work on my engine. New throttle body, TPS sensor, thermostat, and injector seals, which meant I had to take off the inlet manifold, so i put on a new set of manifold seals.
I had replaced the seals about 7 years ago. The old ones I just took off are as soft and supple as the new ones, just a bit discoloured.
You are welcome to them if you want to PM me your address.
Cheers Kev.
I've just done alot of work on my engine. New throttle body, TPS sensor, thermostat, and injector seals, which meant I had to take off the inlet manifold, so i put on a new set of manifold seals.
I had replaced the seals about 7 years ago. The old ones I just took off are as soft and supple as the new ones, just a bit discoloured.
You are welcome to them if you want to PM me your address.
Cheers Kev.
Explorer Features
Explorer Features
