Anyone with pics of 2nd gen wheels on 3rd gen?, If so - post'em - they'll fit, right?

[Curtis]

I've got 2nd gen wheels on my 04 xlt, the tires are 265 75 16.
they do give the x a wider stance.

Very nice my friend...

 

[m4dc0w]

I know I did the opposite (putting gen3 on a gen2), and needed 1" spacers or they would rub on my upper control arms. So you would get at lease 1" wider stance going the opposite way.

 

[JCUZ]

I've got 2nd gen wheels on my 04 xlt, the tires are 265 75 16.
they do give the x a wider stance.

Like the truck, and the name! Both are similar to mine.

 

[goatman]

here ya go... http://www.cardomain.com/ride/2191157

My previous truck was a 2001 x sport... my current truck is an 2004 x xls, which has those ugly simplistic rims... I talked the dealer into swaping the tires and they worked great... looks improved a great deal... there is no rubbing... I did notice that the bottom of the calliper/break assambly looks to be really close to the inner part of the wheel/rim... I forgot to look in the original set of wheels so I don't know how close are they supposed to be in the 3rd gen's.

They stick out about an inch from the fender... I don't have any moldings or anything, which make a difference.

I have the same wheels on my 05 as rama1200. They are 16" with a +12 offset. My stock wheels were a +30 (I'm thinking). This moved the tires (245/75/16) out to the edge of the wheel wells. I think the 2 gen wheels on the 3rd gen is a perfect fit.