Brake Lights

[CaptKirk]

I have to replace one of my brake light bulbs. I removed the 2 screws on the top of the rear housing and the housing should just pull off, right? But, it dosn't seem like it wants to and I don't want to brake it.
Any ideas?
Thanks,

 

['92Bauer]

After you remove the two screws you may have to give a good tug to get the tail light off, they are held in by pins similar to one that hold in interior panels. I have a '92 but your year should be similar, maybe someone else can confirm.

 

[double_take]

Yep after you remove the screws just pull it off. It is a little tight but just rock it a bit and it comes right off.

 

[EBInterceptor]

I've replaced the bulbs on a '93 before too....just had to give it a nice good yank. Doesn't just pop out easily, those pins I think are pretty long. They are mainly held in by the pins though and not the screws. Just give it a couple real good tugs and it should pull straight out.

 

[jasonb]

yeah, it will sound like you broke it when you manage to pull it out. don't worry though, you won't. just yank the crap out of it.