-
Performance Upgrades - Maintenance - Modifications - Problem Solving - Off-Road - Street Trucks.
Covering the Explorer, ST, Sport, Lincoln Aviator, Sport Trac,
Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Aerostar.
Featuring H.I. - Human Intelligence.
Register Today It's free!
Bronco II fuel pump replacement
- Thread starter w2b
- Start date
ragajungle
Explorer Addict
- Joined
- November 8, 2008
- Messages
- 1,023
- Reaction score
- 3
- City, State
- Chicago, IL
- Year, Model & Trim Level
- 89 BroncoII & 05 Taurus
should just be 2 bolts, line, and gasket..
- Joined
- March 13, 2005
- Messages
- 7,283
- Reaction score
- 21
- City, State
- Martinsburg WV
- Year, Model & Trim Level
- 84 BII "Li'l Samson"
Yep, that's it. And torque the bolts between 14-21 Ft-Lbs.
Also if the rubber is cracked going to pump, you need to replace.
And if you want to pressure test the pump then the reading your looking for is 4.5 - 6.5 PSI after 30 seconds of running. There will be enough fuel in the bowl to do this even though the line is disconnected to the carb and pressure gauge connected to the end.
Also if the rubber is cracked going to pump, you need to replace.
And if you want to pressure test the pump then the reading your looking for is 4.5 - 6.5 PSI after 30 seconds of running. There will be enough fuel in the bowl to do this even though the line is disconnected to the carb and pressure gauge connected to the end.
Featured images
Featured images
