italianbigsky
Active Member
- Joined
- February 17, 2011
- Messages
- 79
- Reaction score
- 0
- City, State
- Lecco, Italy
- Year, Model & Trim Level
- '96 4.0 V6 limited
Hi all,
once again a request, an advice to help this Italian Explorer fan who is in trouble.
I have to replace all brake tabs of my 96 explorer limited before it's too late, but they are hard to find here
and very very expensive, around $300 
So, I thought to buy them on rockauto.com, but I need some advices as its the very first time I buy something online for this car.
The question is: I put the VIN and it resulted the car was built in the US in 1995, 4000cc, ohv, 4x4 limited... (vin is: 1fmdu34xxsua92269 )
I loked the rockauto site and wanted to buy some High performance/heavy duty brake pads, but there are a lot of them and I really don't know if ALL of them could fix my car. I searched for Ford--1995--explorer--4.0--brake--pads.
So, what else should I consider before buying them?
I thought about wagner "severe duty", both front and rear... do you think they would fit my car?
Thank you so much... your help could save me more than $150...
have a nice day and regards from sunny Italy
EDIT
I found some brake pads this afternoon in a shop, they sell it for about $110 and that is a good price compared to all the others, a little more expensive than rockauto but pads are already here and I can change them tomorrow.
My question is: FERODO Part # FSB1129 and #FLB1130 (daily driver) are marked on rockauto with the European Flag.
can you help me with this, do these pads fit my Explorer? I tried to understand this on the internet from the VIN but I couldn't.
Thanks a lot. Grazie mille.
once again a request, an advice to help this Italian Explorer fan who is in trouble.
I have to replace all brake tabs of my 96 explorer limited before it's too late, but they are hard to find here


So, I thought to buy them on rockauto.com, but I need some advices as its the very first time I buy something online for this car.
The question is: I put the VIN and it resulted the car was built in the US in 1995, 4000cc, ohv, 4x4 limited... (vin is: 1fmdu34xxsua92269 )
I loked the rockauto site and wanted to buy some High performance/heavy duty brake pads, but there are a lot of them and I really don't know if ALL of them could fix my car. I searched for Ford--1995--explorer--4.0--brake--pads.
So, what else should I consider before buying them?
I thought about wagner "severe duty", both front and rear... do you think they would fit my car?
Thank you so much... your help could save me more than $150...
have a nice day and regards from sunny Italy
EDIT
I found some brake pads this afternoon in a shop, they sell it for about $110 and that is a good price compared to all the others, a little more expensive than rockauto but pads are already here and I can change them tomorrow.
My question is: FERODO Part # FSB1129 and #FLB1130 (daily driver) are marked on rockauto with the European Flag.
can you help me with this, do these pads fit my Explorer? I tried to understand this on the internet from the VIN but I couldn't.
Thanks a lot. Grazie mille.