Maurice999
New Member
- Joined
- December 13, 2006
- Messages
- 1
- Reaction score
- 0
- City, State
- Teaneck, NJ, 07666
- Year, Model & Trim Level
- 95 xlt
Explorer 1995 4WD
Have a problem and need some help. My central locking works perfectly from the driver's, passenger and rear door panel buttons but will not operate on the door locks with the key.
First I checked all fuses in the box.
Second I removed the driver's door panel and the lock apperrs to operate fine.
I opened the connector block and omhed the lock and got a full reading when the key was turned.
Next I bridged the connector wires going to harness and nothing. This indicates to me that the problem is not on the door locks.
As both doors locks don't work I'm wondering if there is an inline fuse or common harness bridge that might be disconnected.
Any ideas?
Have a problem and need some help. My central locking works perfectly from the driver's, passenger and rear door panel buttons but will not operate on the door locks with the key.
First I checked all fuses in the box.
Second I removed the driver's door panel and the lock apperrs to operate fine.
I opened the connector block and omhed the lock and got a full reading when the key was turned.
Next I bridged the connector wires going to harness and nothing. This indicates to me that the problem is not on the door locks.
As both doors locks don't work I'm wondering if there is an inline fuse or common harness bridge that might be disconnected.
Any ideas?
