cleaned transfer case motor but no 4wd lo still

[sajnaj]

i cleasned my transfercase motor tonight and know 4x4 high works like a charm but when i put it in neutual and depress the brake my 4x4 high light kicks out and the 4x4 low does not come on any advice would be usefull thanks jason

 

[RangerX]

Maybe this will help?
Dead Link Removed

 

[RangerX]

One more to look at.
http://ylobronc.users.superford.org/documents/electric1356/elec1356.htm

 

[410Fortune]

Is it in Neautral?

SOunds like the t case motor was not put back together properly, If you look at the motor case closely there is a bunch of hash marks on the lid for the stator assembly.
When you take the motor apart you need to mark it so you can put it back the same way.

If you are still having problems after making sure the truck is in N or P or clutch pushed in when you try to shift into LOw, let me know...