Converting from gas to hydrogen

[drx]

Oh that would be awsome man, I thank you very much.

I am thinking that I need a gas mixer along with two regulators one from the tank and the other before the gas injectors. After doing some more research and asking around people have been telling me that using a carberator system I'll get backfire, so I decided to go with the injector system. Is this what you have too? A regulator, gas mixer and of course the ECU is gonna be different too.

I can't wait to see the pics.

 

[Exploderpilot]

Send a PM to metal magician, He will send you pics of the setup.

 

[drx]

Thank you for posting those wonderful links, they were rather very interesting. I had seen Denny Klien's video before that's what inspired me to do this project.

An update with regards to my project, I found a 2000 Ford Crown Victoria that had been convereted to Natural Gas, from a junk yard. I took the parts that went into that engine and now I am converting the 1974 Ford F100 4.9L inline-six cylinder 300 CID carburetor engine into a fuel injected hydrogen powered internal combustion engine. The distributor is also replaced with an electronic spark plug that is currently being used.

For this process, I have to drill 6 holes to insert the fuel injectors, I made a drill hole in a test dummy engine and it was successful. I will be drilling the holes over the weekend. I am using the carburetor as an air intake module, with all fuel lines, choke line, vaccum line shut off to the carburetor.

I am now just hoping with this modification I can get the engine started. But before this can happen, does anybody know what else I'm missing to do this conversion fully? as in what other modifications I have to do.

 

[BrooklynBay]

I don't know if this will help you, but here are some parts which convert a fuel injected vehicle to run on propane: http://cgi.ebay.com/ebaymotors/Prop...015QQitemZ250199048367QQrdZ1QQsspagenameZWD1V