slugmike
Well-Known Member
- Joined
- November 21, 2003
- Messages
- 121
- Reaction score
- 0
- City, State
- Sunnyvale, CA
- Year, Model & Trim Level
- 2001 Explorer Sport
hey all.
trying to change out the coolant on my 01 sport. i have a haynes manual, and it says to get to the radiator drain plug, you may need to remove a plastic splash shield held on by plastic clips.
i think i see the splash shield, but it appears to be held in place by at least 8 screws... am i looking at the right thing?
the manual says the radiator drain is on the bottom left (driver side) of the radiator... and i only see one shield covering that area... its a big one that covers almost the entire front underside area...
just want to make sure i'm taking off the right shield... cuz there's a lot of screws holding it in
thanks!
trying to change out the coolant on my 01 sport. i have a haynes manual, and it says to get to the radiator drain plug, you may need to remove a plastic splash shield held on by plastic clips.
i think i see the splash shield, but it appears to be held in place by at least 8 screws... am i looking at the right thing?
the manual says the radiator drain is on the bottom left (driver side) of the radiator... and i only see one shield covering that area... its a big one that covers almost the entire front underside area...
just want to make sure i'm taking off the right shield... cuz there's a lot of screws holding it in
thanks!