87xjmike
Well-Known Member
- Joined
- May 11, 2015
- Messages
- 121
- Reaction score
- 24
- City, State
- Colfax, ca
- Year, Model & Trim Level
- 93 exploder
93 expo 5spd manual 4x4:
I have a new sensor from ford dealer with the updated pigtail, installed the pigtail and am getting alternating voltage from 0-14.5v when I rotate the drive gear so my wire configuration should be good.
Problem: my sensor did not come with the alignment tool or a transparent window. In my Chilton manual it says on pre 96's to Align the sensor vein with the mark on the sensor window, and firther dial in the drive grar position with voltage position.
Well my new sensor does not have a transparent window, it has what looks like an electonic window screen on the top of the sensor, but even with power going to it, it does not show me the location of the rotating vein.
On the post 96 section it chilton said to align with the tool so it points 60* from the engine centerline, install and go.
So do I need the alignment tool? If so do I follow the 60* from centerline per the newer sensor guidlines?
Thanks in advance for any support.
Really wish this site was on tapatalk so I can upload pics.
I have a new sensor from ford dealer with the updated pigtail, installed the pigtail and am getting alternating voltage from 0-14.5v when I rotate the drive gear so my wire configuration should be good.
Problem: my sensor did not come with the alignment tool or a transparent window. In my Chilton manual it says on pre 96's to Align the sensor vein with the mark on the sensor window, and firther dial in the drive grar position with voltage position.
Well my new sensor does not have a transparent window, it has what looks like an electonic window screen on the top of the sensor, but even with power going to it, it does not show me the location of the rotating vein.
On the post 96 section it chilton said to align with the tool so it points 60* from the engine centerline, install and go.
So do I need the alignment tool? If so do I follow the 60* from centerline per the newer sensor guidlines?
Thanks in advance for any support.
Really wish this site was on tapatalk so I can upload pics.