saxon
Well-Known Member
- Joined
- March 30, 2006
- Messages
- 149
- Reaction score
- 1
- City, State
- seattle, wa
- Year, Model & Trim Level
- '91 & '93 EB, 4WD, 4-door
This is not the exact Kenwood I am installing but its close and it is the exact same size as the one I am installing:
http://www.crutchfield.com/S-3CI3uX7cIgt/cgi-bin/ProdView.asp?g=300&I=113MP732
Crutchfield states that: "To install this item, you'll need to modify your vehicle." When I click on the "Installation Details" below that warning, a pop up window (sorry, I can't provide a direct link to that) states that:
1) Minor filing (less than a sixteenth of an inch) of your car's trim panel is required
and
2) You will drill 3 holes in your dash to mount the kit and the aftermarket radio. A trim ring is provided to cover the holes.
What kind of filing is required, do I file the dash panel or something behind that?
Has anyone installed a Kenwood using the Crutchfield instructions? I looked on this forum and I could not find anything on that subject.
http://www.crutchfield.com/S-3CI3uX7cIgt/cgi-bin/ProdView.asp?g=300&I=113MP732
Crutchfield states that: "To install this item, you'll need to modify your vehicle." When I click on the "Installation Details" below that warning, a pop up window (sorry, I can't provide a direct link to that) states that:
1) Minor filing (less than a sixteenth of an inch) of your car's trim panel is required
and
2) You will drill 3 holes in your dash to mount the kit and the aftermarket radio. A trim ring is provided to cover the holes.
What kind of filing is required, do I file the dash panel or something behind that?
Has anyone installed a Kenwood using the Crutchfield instructions? I looked on this forum and I could not find anything on that subject.
