Engine cleaning after rollover | Ford Explorer Forums

  • Register Today It's free!

Engine cleaning after rollover

Vozar

Well-Known Member
Joined
September 12, 2002
Messages
822
Reaction score
4
City, State
Murfreesboro,Tennessee
Year, Model & Trim Level
94,98 & 03 explorer
Rolled it over about a month ago. Im just now getting time to work on it. Leaked about a quart of oil out and other various fluids. I found alot of oil in airbox,MAF,and throttle body. Ive cleaned all of those out. After i took the TB of i notice some extra oil in the intake plenium, Should i take this off and clean it or will it be ok? What else should i clean out in the engine internally,Thanks,


Matt
 






sounds liek you got it covered.... might want to shoot some tb approved intake cleaner down the bore and run some seafoam but internally for the engine sounds fine... make sure to top off all your fluids.....
 






To wash it, just spray engine degreaser on it, set for 5-10 minutes, and spray off with a water hose. Don't do it in direct sunlight. Everything will be fine to spray water, if it is all assembled. Good luck,
 






CDW6212R said:
To wash it, just spray engine degreaser on it, set for 5-10 minutes, and spray off with a water hose. Don't do it in direct sunlight. Everything will be fine to spray water, if it is all assembled. Good luck,

What Don said plus you might need some Simple Green for the tough stuff,

Good luck .......
 






Featured Content

Back
Top