everything workes, but no airflow...

[Equnoxe]

ok so i went out offroading in a huge thunderstorm, and now my climate control system doesn't work at all. all the light on the screen come on, and i can hear the system clicking between the settings, and the ac/heater do still turn on when i select them.

but there is no airflow at all.... ive washed out the outside air intakes, but still no luck...


any ideas? i don't know were to start, maybe the blower motor is pooched?

 

[TheJackal]

Have you checked the fuse?

 

[Equnoxe]

yes, they are fine does this have a relay? or is there a way to see if the blower is gone

 

[TheJackal]

Have u tried eatc self-test?

 

[TheJackal]

To enter the self-test, press the OFF and FLOOR buttons simultaneously and then press the AUTOMATIC button within two seconds. The display will show a pulse tracer going around the center of the display window. The test may run as long as 30 seconds. Record all DTCs displayed.

If there aren't any codes than the EATC unit will show code 888.

If the blower isn't coming on at all it could be the blower itself. It uses a speed controller for the lower speed modes and a relay for full speed mode.

 

[Equnoxe]

thanks, i didnt even know that, ill try it and come back with the results thx