fog lights

[foxy]

Guys ,How do I wire my fog lights to come on when on low beam bearing in mind they are currently connected to my high beam?

 

[Zulu95]

Did you rewire them to come on with the High Beam? Most I've seen come on only with low beam lights. Do a forum search as I remember reading a mod here some years ago about converting the fogs to be switched from an ignition source so you could use them any time.

 

[xj220]

Do what a "friend" did (hehe), connect the switch wire directly to the positive terminal of the battery.

 

[foxy]

Guys ,Here in australia (oz) our girls came with driving lights not fog so on high beam we would have up to 6 lights on on high beam at once because we would add a couple of Hella 4000's as well for long distance driving but as you can guess low beam was or is a shocker but a couple of fog's would help I hope ,yes I probably will put a seperate wire from the batt and add a lighted switch inside the cab .Any other idea's ? becauseI'm not overly keen on that idea I'd rather somehow have it wired to the dipper switchwith the main lights ?

 

[dr_starcraft]

Maybe do what I did to my fogs...

Run a separate positive wire spliced into the positive wire on the light harness and just add an auxilury switch in the cab so you can turn them on whevever the hell you want to. High beams, Low beams, NO beams

-Chris

 

[foxy]

Chris , THanks mate your right that's what I'll do

 

[dr_starcraft]

No problem, make sure to seal up the wires good, they are in kind of a bad spot for mud and such.

-Chris