Ford explorer 93, 4.0L, problem with 4x4

[furest]

Hi guys
I am new on this forum and comming from Europe, Croatia.
My father in law is having this car and having problem of starting 4X4.
When you push button 4x4 nothing happens.
I read that thread which explains a lot. Can someone explains me more closely where that module which is controling motor for engage is located in the car?

Thanks for help.

 

[Midjurion]

Here is a sticky that I had just happened to read earlier today.
http://www.explorerforum.com/forums/showthread.php?t=202166
Hope this helps

 

[FIND]

To answer your question, it is in the cargo area behind the panel on the drivers side above the wheel well. Hope that helps

 

[furest]

Thanks for help guys, for sure I will have many more questions. This car is very rare in my country reason more to keep it running as long I can.
Cheers

 

[furest]

Hi Guys

Does anybody have electrical drawings of 4x4 system, from switches to module and to motor? If anybody have it would be highly appreciated.

 

[furest]

Anybody, anything?
Looks like no luck.

 

[furest]

Hi guys
Manage to fix my father in law truck 4x4. This was very helpfull forum.
If anybody needs any drawings for explorer 1993 all can be found on www.alldatadiy.com. Very good web page.
Cheers

 

[DeRocha]

Glad to hear its fixed.. What was the problem?

 

[furest]

Problem was in that plastic part on transfer case motor. Open the motor replaced broken part, add some grease on the gear and everything working without problem.
I found good page where you can find all the drawings electrical and mechanical www.alldatadiy.com