Front Shock Adapters?

[CHAZ98X]

I need to replace my front shocks. I have some Bilsteins laying around that I think might fit. Does anyone know what length I should go with with a 1.75" Torsion Twist? Also, is there an adapter out there that converts the stem mount to a standard shock mount?

 

[mounty71]

For a torsion twist only, the stock length shock should work. You are not gaining any more travel. And there are adapters for the stem type of shocks. I think i may have some i can ship to you. But with those adapters (they are about 2" long), your stock length shocks may be too long now. I'm not sure.

 

[CHAZ98X]

The new shocks are shorter than the rear. Do you know what size the front stock shocks are? How much do you want for the adapters?

 

[mounty71]

Sorry, i don't, but i'd bet you could easily found out with a quick search of the forum.

 

[danwaters]

you can have a set of tabs welded in your shock bucket at the propper spacing by a welding shop faily cheap if you are not capable yourself. I mean a set of tabs from ORW are about $2-3 ea.

THe longest shock youll want in there is an 8. Anything longer wont work. You can measure the shaft length as they are fully extended and that will give you a very close figure of what the shock stroke is.