4greenfords
New Member
- Joined
- July 26, 2010
- Messages
- 3
- Reaction score
- 0
- Year, Model & Trim Level
- '14 Explorer XLT
Hello,
'02 Explorer XLT w/ 4.0 V6. Need to replace the metal fuel filler neck/pipe and haven't done this before. I searched around but didn't see any Stickies or detailed instructions. So I'm seeking advice, TIA
I assume I have to start by unbolting the neck at the cap (3 screws) and then let the tank down a bit to remove the neck? What's all involved on the tank side of things? Any suggestions?
Appreciate any/all input!
'02 Explorer XLT w/ 4.0 V6. Need to replace the metal fuel filler neck/pipe and haven't done this before. I searched around but didn't see any Stickies or detailed instructions. So I'm seeking advice, TIA
I assume I have to start by unbolting the neck at the cap (3 screws) and then let the tank down a bit to remove the neck? What's all involved on the tank side of things? Any suggestions?
Appreciate any/all input!
