ryf
Well-Known Member
- Joined
- February 5, 2005
- Messages
- 385
- Reaction score
- 0
- City, State
- Portsmouth, OH
- Year, Model & Trim Level
- 94 Explorer XLT 4x4
whats been the experience for you guys about which gasless flux wires work better for mild steel up to 1/8" thick, no smaller than 1/16" or 16 gauge'ish... I know how to size my arc welder, but the Mig is new to me, so looking for suggestions, I weld outside, no wind break, hence the switch to no gas (never could get a good shield on the windy days), ARC was never that finicky, but it requires 220v, which I can't get out to the welding area either right now.