Heated Leather Seats Wire Question..

[98 V8]

I Put Heated Leather Seats in my Ranger, I have the Power Wires
Done, but I want to know what Wires r + n - for the Heaters..

Thanx,
Rob

 

[TheJackal]

So, these are Explorer seats? From which year?

 

[98 V8]

98 EB.. Driver n Pass Full Power n Heat

 

[TheJackal]

hmm, I don't see anything about heaters in the diagrams.

Was this a dealer or aftermarket product?

 

[98 V8]

hmm, I don't see anything about heaters in the diagrams.

Was this a dealer or aftermarket product?

98 EB Explorer Seats

 

[BrianDye]

Nice mod

 

[98 V8]

Nice mod

Thanx

 

[TheJackal]

nmv, finally found them, after all that searching last time they came right up?

Make sure you wire it up right so you don't burn your ass.

 

[98 V8]

nmv, finally found them, after all that searching last time they came right up?
Make sure you wire it up right so you don't burn your ass.

The Seats Are PreWired.. I Really wanna know Color Wires are + n -
on the Seats.. So I dont short them out.. Also, what size Fuse Should
I Run??? Any Idea??? Dude Jackal, Your Good...

Thanx,
Rob

 

[TheJackal]

By looking at the diagram, the heater gets its ground from the module. The module is grounded via a black wire.

The positive comes from a 30-amp fused circuit wired to the light blue/white wire. Clearly that's the one that's powering the actual element.

The switches are wired to a 7.5-amp fused circuit via the gray/yellow wire. The module will "see" that positive voltage when you press the switch and know to turn the device on or off.