HELP!!! PLEASE READ info needed ASAP!!

[Mike]

Hey.. im doing my rear roters and pads.. i have the truck up and i have one tire off... i got the calaper off but the rotor wont come off!!! please help here is a pic.. what do i do?!?!?! crap i cant add a photo please help!!

 

[Mike]

come on guys... please... i have work in a few hours... =[

 

[swak6287]

i wish i could help[ but i cannot causr i dont know how. get a big mallot and wack at it..i dont know. good luck man

 

[Soundguy01tx]

email me the pic if you can. B_Martisek@hotmail.com Ill post it for you.
--bryan

 

[Lifted95X]

THATS ALL YOU NEED TO DO...HIT IT REAAAALLLL HARD with a BFH!!!

 

[Ryan1]

are you sure there is no nut holding it on, like on the front rotors?

Ryan

 

[Ryan1]

or just call ford and they will tell you want the trick is

Ryan

 

[Robb]

E-brake is off right?

Robb

edit: no keepers on the studs right?

 

[Lifted95X]

JUST A HAMMER!!

 

[james t]

i had to literally destroy my rear rotors to get them off. you gotta adjust the e-brake out, but if they've never been off, they will be "time-welded" on there. i had to beat on mine with a 5lb. shop hammer while turning them around. it took about 50 hits per rotor to get them off.

 

[Mike]

ok guys i got it off... like you all said.. i used a BFH!! and took my frustration out on the rotor... man even after it was off i was still pounding on it... im done now.. i didnt to the ebreak pads... i spent over an hour playing with them i dont know how to do them... so rather them ****ing somthing up.. i left them... thats for another day... the ones that are on there dont look to bad... but i got run i got 20 min now to take a shower and get to work... blah!!!! thanks agin for the help...


Mike