help with blocks and coil spacers

[bitchinexplorer]

ok i want to install the 2 inch coil spacers and the 2 inch blocks in the rear. i was just wondering if i will have to rotate my axle or not. if so, how much will it need to be rotated.

 

[Robb]

The coil spacers will lift the front of your truck.

The 2" blocks will lower the rear of your truck.

I wouldn't dive too far into this project yet.

 

[bitchinexplorer]

im talkin about the superlift blocks in the rear that will raise the back.

 

[JTX]

No blocks will raise the back. Its SUA go look under it and you will see why. The superlift kit flips the hole axle. Making it SOA. That will give you around 6 inch's of lift.

SOA-Spring Over Axle
SUA-Spring Under Axle

 

[bitchinexplorer]

alright, well screw the block idea then, if i do the coil spacers and the shackle set in the rear, then will i need to rotate the axles?

 

[JTX]

Nope. Spacer and shackles is what you need. That will work fine.

 

[CodePoet]

yeah...no need to rotate the axle at all.

Good luck
cp

 

[bitchinexplorer]

alright thanks. where have u seen the shackels for sale? cause ive looked all over for them for my explorer, and i couldnt find them. its a 91.

 

[bmxking5]

I have heard that http://desertrat.com/ sells the shackles, but you have to call them b/c they don't have them on their site. Or you could go to your local 4x4 shop and see if they will order them for you.

 

[JTX]

I have a set i will sell you. How does $30 plus shipping sound?

 

[bitchinexplorer]

how much shipping to 79070

 

[bitchinexplorer]

and ive got the 3 inch body now, can i fit 33x12.50 with the body lift, coil spacers, and shackels?

 

[j602]

yup

 

[JTX]

Shipping prob around $12.00. Yeah you will fit them. I ran that setup before my current setup. You may need to do a little trimming just depends.

 

[glfredrick]

I had to trim the rear of my front fenders to fit 33's at full stuff on my 92. It's no big deal unless you are worried about keeping the truck to show condition...

 

[bitchinexplorer]

can i get a pic of them???

 

[glfredrick]

I'll try to get a picture tonight when the truck gets back home. My wife has it at work today. Sorry it took a while to respond - I was on vacation...