jpserra
Active Member
- Joined
- February 15, 2008
- Messages
- 78
- Reaction score
- 0
- City, State
- Plymouth, MN
- Year, Model & Trim Level
- 2004 Explorer XLT
I scored a homelink module on Ebay and found an install directions on a Camero site.
The instructions were pretty well done. I will post as soon as I finish, but the mod is a snap once you get past the fright factor of cutting the threads on your visor.
The module is about 2.5" x 3" and runs off the always on wiring for the visor mirror lights. No real current draw, so no issues with fuses or the like, just a little soldering and resewing of the visor with matched nylon thread once it is done.
I'm pretty stoked about having this mod, if you couldn't tell. I'll update when I have photos and a finished project. I expect about 1 hour for the whole thing.
JP
The instructions were pretty well done. I will post as soon as I finish, but the mod is a snap once you get past the fright factor of cutting the threads on your visor.
The module is about 2.5" x 3" and runs off the always on wiring for the visor mirror lights. No real current draw, so no issues with fuses or the like, just a little soldering and resewing of the visor with matched nylon thread once it is done.
I'm pretty stoked about having this mod, if you couldn't tell. I'll update when I have photos and a finished project. I expect about 1 hour for the whole thing.
JP
