counterfeitxerox
New Member
- Joined
- July 2, 2014
- Messages
- 5
- Reaction score
- 0
- Year, Model & Trim Level
- 1999 explorer
Ok so 99 ford explorer vin x 4wd v-6 160xxxmiles. I replaced a brake line going to the rear and couldnt properly bleed the front brakes when I did this because the bleeder was rusted shut on the caliper. Well I replaced the calipers and bled the system properly. I thought the previous problem I had of when I would come to a stop around 2-3mph the abs would engage. Pushing the pedal to the floor n a clicking/jerking fashion making a noise like flyid being pushed through something . Well the brake light is now off (probably low fluid) and im still having this problem. What could it be? Air still in the lines? Hope this is the correft forum for this.
