??? How to Torsion Twist ???

[explorer4x493]

I have searched all around on how to lower using a TT. I can't seem to find specific details. If anyone could either tell me how to do this, or just send me a link on where to find it. Thanks...

 

[Jason_25]

What don't you understand? Crank the bars counterclockwise until it's low enough for you. It could not get any simpler......

 

[Robb]

Try this one: Dead Link Removed

There is also another one on "List Of Useful Threads"

Robb

 

[aldive]

Originally posted by explorer4x493
I have searched all around on how to lower using a TT. I can't seem to find specific details. If anyone could either tell me how to do this, or just send me a link on where to find it. Thanks...

Take a look at how I lowered my 99 ........ Dead Link Removed

 

[explorer4x493]

Originally posted by Jason_25
What don't you understand? Crank the bars counterclockwise until it's low enough for you. It could not get any simpler......

Do i have to mess with the bolts as well? Oh and how precise do i have to be to not mess up anything? Thanks for replying so fast ...

 

[Jason_25]

More specifically you are cranking the adjuster bolts for the torsion bars. Don't worry about messing up anything. Just make sure it's level. When your finished, drive it around the block to allow the bars to settle and when you get back, make sure it's still level. If it's a 4x4 I don't recommend going lower than 3 inches.

 

[explorer4x493]

I just went to autozone and bought 2" lowering blocks and u bolts. Will install soon. Thanks guys...