steve101
Active Member
- Joined
- January 29, 2011
- Messages
- 50
- Reaction score
- 1
- City, State
- virginia beach,va
- Year, Model & Trim Level
- 01 mountaineer
this is my first how to might of not covered everything but this is a general idea
got a cracked center compartment? like you see hear
tools i used:
first start out by taking it out of the car
second take off the back plate
remove factory staples
next mesure ur fabric with the shell
then tack along the straight edge as seen here (use 7mm stables and a strong staple gun mine had a hard time going though)
now its time to work on the curves
tuck and over lap and when you get a flap tucked do this to make a slight slit
make sure its not all bunched up on the edge then staple but watch out the shell you are attaching to is kind of britle so dont force to hard
hope this helps some what im no expert but i did do it myself probly saved $200 hit me up if u have questions. doing the seats coming soon
got a cracked center compartment? like you see hear
tools i used:
first start out by taking it out of the car
second take off the back plate
remove factory staples
next mesure ur fabric with the shell
then tack along the straight edge as seen here (use 7mm stables and a strong staple gun mine had a hard time going though)
now its time to work on the curves
tuck and over lap and when you get a flap tucked do this to make a slight slit
make sure its not all bunched up on the edge then staple but watch out the shell you are attaching to is kind of britle so dont force to hard
hope this helps some what im no expert but i did do it myself probly saved $200 hit me up if u have questions. doing the seats coming soon