97exploderXLT
Active Member
- Joined
- January 4, 2013
- Messages
- 71
- Reaction score
- 0
- City, State
- Newport, TN
- Year, Model & Trim Level
- 96 explorer xlt
Hey guys. Long time no see. Finally found me another exploder. This time it's a 96 with the pushrod beast. Picked her up for a grand and I have a few issues.
I have no 4x4. I can sit here and put the thing in neutral and turn the dial and I get nothing out of the front end. I can put her in 4 low and I can hear the motor on the xfer case doing its thing but there's no typical "cachunk" sound of the gears meshing and the chain tightening inside the box which is a sound I'm sure you're all familiar with lol.
It does change the ratios in the box because when I do this I'm suddenly a torque monster... with 2 wheels...
I've replaced the drivers side abs sensor and the passenger side hub and sensor (abs light is still on though).
Anyone have any ideas or input on this issue??
I have no 4x4. I can sit here and put the thing in neutral and turn the dial and I get nothing out of the front end. I can put her in 4 low and I can hear the motor on the xfer case doing its thing but there's no typical "cachunk" sound of the gears meshing and the chain tightening inside the box which is a sound I'm sure you're all familiar with lol.
It does change the ratios in the box because when I do this I'm suddenly a torque monster... with 2 wheels...
I've replaced the drivers side abs sensor and the passenger side hub and sensor (abs light is still on though).
Anyone have any ideas or input on this issue??