I need help installing an aftermarket stereo.

[elfexplorer94]

Hello,
My girlfriend bought a 94 explorer XLT and it did not have a stereo, and I have been unable to find a schematic so I can install an aftermarket for her. I would really like some help here. It also has a factory amp, I don't know if that will be an issue in the instilllation.

Well here are the wires I have to work with, they are speaker wires to the best of my knowledge
these wires were not in the connector they were taped together and are covered by a gray (sleeve).
Red&White
Blue&Black
Blue
Orange
Yellow
Purple&White
Green
Orange&White

And then there was a bare wire with no coating on it..........

And one more thing someone sent me a reply and a link to a diag and the information on the link was great... I just wish the moron who had the truck prior to my girlfiend would have read it. It states that you are not to CUT the grey sleeved wire and what happend..... wait for it...... they CUT the grey wire (plug) ....

 

[fixxxer]

Dead Link Removed
That's for a '94. I believe that the factory lead to turn on the amp is not 12v, it's a 5volt line so you need an adapter to knock the pwr ant/accessory lead from 12 down to 5v.

 

[BrooklynBay]

Welcome to this forum! I've renamed, and moved your thread to the audio section for more attention.