Ifs Shot!Again! but what else while im in there?

[mikebolk]

Ok so it has been a while since i posted anything but i have been doing alot of reading!!

I have replaced my hubs a couple times lower ball joints once..axles once and now! inner and outer tierods another lower ball joint and upper control arms..

im going with XRF everything (a million mile warranty? im in!)

but ive been reading a bunch about bent knuckles.. my aunt has 2nd gen no TT and her truck is higher then mine. i want to find out if there is a way to measure them or see were they are bent. but i dont know what to look for..

so if it is the case that my knuckles are bent its superlift time... im going to go front box kit and SOA. i already have new skyjacker hydros for it with the lift factored in. and a new longer rear brake line..

the other thing that im pondering is how the truck will look with the 4" superlift and 31s i have 31s on offset rims rite now. tt and shackles..

any input from you guys would be greatly appreciated

this is what my truck looks like at the moment..

 

[mikebolk]

shazamm

31's with tt shackles, and 4 inch Superlift, , and it looks fine to me,

one question answered after some more searching 31's and a 4" aint half bad looking..

 

[rabbit91]

SAS Dana44