In the middle of removing Radiator, have question

[King$nake]

Ok, so I removed the (2) upper bolts, disconnected the fan shroud, removed the trans cooler lines. The radiator is loose, and seemingly ready to pull out, but the condensor is attached to it. I've pulled one screw out (top-left) that connects the condensor to the radiator, but I cant figure out where it is still connected? I need to remove the condensor from the radiator to pull the radiator out

thanks

 

[Dan Whitaker]

There are two clips on the bottom (R & L side) that hold the condensor to the radiator. They are a ***** to get to.

 

[King$nake]

There are two clips on the bottom (R & L side) that hold the condensor to the radiator. They are a ***** to get to.

ok, I removed the two clips at the bottom as well. Now there is a clip half-way up on the driver side that I dont know how to get to release. Plus the upper clip on the driver side, I dont know how to remove that one either

 

[King$nake]

nm, I got it fixed