Joe Dirt
Explorer Addict
- Joined
- October 4, 2007
- Messages
- 13,173
- Reaction score
- 32
- Year, Model & Trim Level
- 07 Camry
This was a detail that one of my buddies over on the Meguiars forum did since, you know- you'll recognize the make and model of the vehicle... 
Yikes...
Normally we would wetsand and bring back afterwards, but the customer didn't have that in the budget, so this was the process- this is all machined, btw- no sanding...
Solo red wool
105 not enough work time dusting up but cut ok
86 did not cut as well as 105
95 cut fine but not the clarity of 105
3M 6085 I had a little left in the bottle cut & clarity ok
Went with 105 and misted last touch for final passes
G110 set on 3 and # 105 with yellow 2.0 pad
G110 set on 3 and # 80 with yellow 2.0 pad
G110 set on 2 and # 21 with black 2.0 pad
1/2 and 1/2 pic...
Getting there...
Hmmm...
And finally...
That's good work right there...

Yikes...
Normally we would wetsand and bring back afterwards, but the customer didn't have that in the budget, so this was the process- this is all machined, btw- no sanding...
Solo red wool
105 not enough work time dusting up but cut ok
86 did not cut as well as 105
95 cut fine but not the clarity of 105
3M 6085 I had a little left in the bottle cut & clarity ok
Went with 105 and misted last touch for final passes
G110 set on 3 and # 105 with yellow 2.0 pad
G110 set on 3 and # 80 with yellow 2.0 pad
G110 set on 2 and # 21 with black 2.0 pad
1/2 and 1/2 pic...
Getting there...

Hmmm...
And finally...
That's good work right there...
