yob_yeknom
Moderator Emeritus
- Joined
- November 14, 2000
- Messages
- 4,361
- Reaction score
- 0
- City, State
- Glade Hill, Virginia
- Year, Model & Trim Level
- '97 XLT & '06 Limited
Here are some pictures of the keypad from my '01 Explorer. Definitely no way to change the lights.
Pic 1- It's the keypad with the 5 seperate buttons, not the one with all 5 buttons on a strip.
Pic 2- The backside of the buttons. Since they are all one piece of rubber, I imagine everything is the same as the earlier keypads, just a new look on the outside of the door.
Pic 3- The circuit board inside the keypad. There are 5 very small odd shaped lights, 1 behind each button.
Pic 4- The lights have square bottoms and are held on by very small clips soldered to the board. The clips also provide the connections to the lights.
Pic 1- It's the keypad with the 5 seperate buttons, not the one with all 5 buttons on a strip.
Pic 2- The backside of the buttons. Since they are all one piece of rubber, I imagine everything is the same as the earlier keypads, just a new look on the outside of the door.
Pic 3- The circuit board inside the keypad. There are 5 very small odd shaped lights, 1 behind each button.
Pic 4- The lights have square bottoms and are held on by very small clips soldered to the board. The clips also provide the connections to the lights.