longer swaybar links for lift in front.

[Tike]

with the BTF and truxx lift my sway bar bushings are getting anhilated. trying to put in new pushings is nearly impossible even with the LCA being pressed up with a jack. i need longer bolts. or something. anyone have any luck or ideas. would grade 8 bolts work i can order them online for a few bucks a bolt and where can i get just bushings? moog and them only sell the hole kit.

 

[swshawaii]

2nd Gen "Custom" Anti Sway Bar Links, Cheap!

After I installed my used Superlift, I needed front sway bar links. None were available locally, and the Superlift parts were expensive. My stockers were rusted solid, I had to hacksaw them off, so I had no choice but to make some. Parts List: 2 pieces appropriate length of 3/8"...

www.explorerforum.com

 

[Tike]

2nd Gen "Custom" Anti Sway Bar Links, Cheap!

After I installed my used Superlift, I needed front sway bar links. None were available locally, and the Superlift parts were expensive. My stockers were rusted solid, I had to hacksaw them off, so I had no choice but to make some. Parts List: 2 pieces appropriate length of 3/8"...

www.explorerforum.com

Goat.
tried look but not on the 2nd gen forum.

 

[Tike]

2nd Gen "Custom" Anti Sway Bar Links, Cheap!

After I installed my used Superlift, I needed front sway bar links. None were available locally, and the Superlift parts were expensive. My stockers were rusted solid, I had to hacksaw them off, so I had no choice but to make some. Parts List: 2 pieces appropriate length of 3/8"...

www.explorerforum.com

just built and installed these. super easy. super fast. less than 30minutes on the ground. old bushings were gone completely. thanks mate