MINERALGSVT
Well-Known Member
- Joined
- May 7, 2002
- Messages
- 160
- Reaction score
- 3
- City, State
- Carmel, IN
- Year, Model & Trim Level
- '99 Saleen XP8
Ok. I've read through about 6 pages and lots of good info. However, I've seen lots of posts about jumping the low pressure switch - where the heck is it? I see a connector right near the back of the compressor with 4 connectors(2 wires), and then another switch over on the passenger side near the big round tube.
Oh.. it's on my '98 SOHC. No air, and the compressor isn't kicking on.
My thought was to jump the low side and if it blows hot, I'll add freon and replace the switch. If it blows cold, I'll just replace the switch.
Thanks for any input.
Oh.. it's on my '98 SOHC. No air, and the compressor isn't kicking on.
My thought was to jump the low side and if it blows hot, I'll add freon and replace the switch. If it blows cold, I'll just replace the switch.
Thanks for any input.