energie
Well-Known Member
- Joined
- August 5, 2004
- Messages
- 286
- Reaction score
- 0
- City, State
- Edmonton, AB, CA
- Year, Model & Trim Level
- 2000 Explorer XLT
Hey, so the short end of the question is what would cause a vehicle to misfire in all 8 cylinders?
I ran a datalog using the PID's MISFIRE_CYL_1 through 8 and they all show misfires, yet when i start revving the vroom vroom steady at about 2k, the misfires go away and its all 0. is there anything that would cause this? bad coils? i thought that but all 8? the vehicle wouldnt even run.
I ran a datalog using the PID's MISFIRE_CYL_1 through 8 and they all show misfires, yet when i start revving the vroom vroom steady at about 2k, the misfires go away and its all 0. is there anything that would cause this? bad coils? i thought that but all 8? the vehicle wouldnt even run.
