more power

[NaplesBill]

Originally posted by OZexplore
go for the yamaha R1 185mph+ guaranteed (stock)

Here is my bike! It's slightly faster than the R1(1-2mph). I added the Yellow accents:

 

[rocket 5979]

Originally posted by mx_racer_14
if you want a better intake manifold go with a cobra, it supports around 400 hp... a little better than the gt 40 intake

Actually the stock explorer 5.0's intake specs out just as good as the 5.0 Cobra intakes did. That is why they are referred to as Cobra intakes around here.

Hey that E-303 camshaft part # is FMS-M6250E303. The link to that in summitracing.com is HERE And and I got a post somewhere around here with the parts # for the Crane cams spring and retainer kit I used also. You might have to look around for it, but I am pretty sure that part # is around here floating on this board somewhere.

 

[rocket 5979]

Actually I just found it. the part number is CRN-44308-1 and the link to it in summit is HERE Hope this helps you.

 

[sk8volcom14]

ok so the 1st link is for the Cam, and the 2nd link is the parts i need for it, right?

 

[rocket 5979]

Yeah you are correct. But since you are doing all of that you will want to switch from your stock stamped metal rockers to roller rockers. I had gotten crane 1.7's but I recommend the Crane 1.6's for most people. Unless you got other plans in mind. Well good luck.

 

[sk8volcom14]

ok great thanx a lot for your help!