MTX Installation Instructions??

[Bill Kemp]

Does any one have installation instructions for an MTX Thunderform? Got one today and want to be sure I hook all the wires up correctly.
Thanks...

 

[Crimson]

Give this a try....

http://www.mtxaudio.com/


paul

 

[Bill Kemp]

Thanks, I emailed them. We'll see if they respond.

 

[gard_mc]

Amplified or not? I had the amplified one, it was very easy. just plug in the harness and attach the red wire to the battery, black to ground and splice a line off of your rear speakers for the input. (It didn't even need a blue turn on line this way).

 

[IAmTodd]

If you use the pre-outs(RCA cables) the way i did, I just ran the red wire to the battery, ran the 2 RCA cables back, and there is already a turn on wire for the stock amp, i just used that since i no longer use the stock amp, Ground i just put it on one of the screws the held it in, if u have anymore questions, I'll probably be able to help ya! Good Luck!